Information on Filters Parts and Accessories » Harmsco filters

Using Cartridge Filters, First Priority for Home Pool Users

admin — Thu, 29 Jul 2010 06:44:41 +0000

A house with a pond that is newly purchased most often is seen to have cloudy water. The water in such pools is never quite right. Sometimes they are even found green due to the rise of algae levels. In such situations, the priority of the owner is to get the pool cleaned. The users may have to skim the walls of the pond and replace the water. Then it becomes necessary to maintain this clean pool from any further damages. For this reason, installing cartridge filters of bands like Harmsco or Waterway becomes necessary.

The filters keep trapping dirt particles that remain suspended in the water of the pool. This is reason why the chemical balance of the water is well maintained. As no impure elements find a way into the pool so there arises no question of a chemical misbalance. Adding extra chlorine in water for removing algae and bacteria though is necessary but now can be skipped with the installation of the new cartridge filters. The water remains pure and so gallons can be saved from being wasted away. The performance of such pool filters is exceptional as they can be used non-stop to execute the filtration process. Even when they are clogged and the pressure rises, the cartridge used in the filters can be quickly replaced with new ones and the filtration process resumed. The replacement filter cartridges are available at discounted prices and are an easy option to get such clogged in pool accessories replaced. Home ponds can thus be cleaned and kept safe for swimming reasons.

Methodology for cleaning of pool filters

admin — Thu, 10 Jun 2010 09:02:35 +0000

The filters of brands like Baker Hydro and Harmsco when installed in a pool get clogged after some days of use. Then the concern is to clean it for future usage. There are many cleaning methods that are in place for cleaning the filters. Starting from washing the cartridge with water to keeping it immersed in a solution of acid becomes essential for complete cleaning. The hose connected with a water source can be used to spray water in the cartridge. This cleans a lot of dirt that accumulates on the surface of the cartridge. But this will not be enough as oily substances need to be treated with solutions of acids. For this reason, I would suggest that you prepare a Chlorine solution and keep the cartridge immersed for some time. This will kill all the micro-organisms on the cartridge surface. Then wash it again with water and re-immerse it, this time, in a solution of muriatic acid. If necessary keep it soaked overnight. The acid will react with the mineral elements and will dissolve them. So, your cartridge will become free from all extraneous materials by following these procedures.

This new method of cleaning is much morcartridges cleaning methodse advantageous in comparison to the conventional cleaning methods where one has to backwash the accumulated dirt. The filament used to build the cartridge is made of a superior material more commonly known as polyesters. This material can easily filter out tiny particles that can only be seen in microscopes. The efficiency of filtration thus becomes much more pronounced with this type of filters.