Posts Tagged ‘Pool Filters’

When does Your Cartridge Pool Filters Require Cleaning?

Wednesday, January 11th, 2012

As a pool owner, your primary responsibility involves proper upkeep and maintenance of your pool. Upon frequent use, your pool becomes soiled with algae, grime and muck. To keep your pool water crystal clear and experience a great-swimming experience, it is important to clean your Pool filter at regular intervals of time to make it muck free.

One of the most cost-effective methods of cleaning your pool is cartridge pool filters. Cartridge pool filters are made up of numerous folds of filter paper; these folds trap undesirable as well as dangerous particles from pool water making it clean and hygienic.

With time, the folds become clogged and flow of water no longer remains easy. Consequently, the pressure within the filter increases. When PSI reaches 8-10 PSI above its normal reading, it is time to cleanse your pool filter cartridge.

In order to clean your cartridge pool filter, you can remove the cartridge from the filter housing and instantly rinse it with a garden hose to get rid of loose dirt and debris. High pressure spray nozzle should be avoided or as this may perhaps push dirt deeper into the cartridge.

Next, immerse the filter cartridge in a good quality cleansing solution, which is useful in removing sticky body oils, sunscreen lotions etc introduced by bathers and cannot be simply removed with water. Finally, rinse the filter thoroughly with water to do away with the cleaning solution or any remaining dirt particles.

We at www.filters4less.biz have become specialize providers of pool equipment and spa cartridges. Since, we stock products of leading brands, great performance, longevity and high affordability is ensured.  Browse through our site to know more about our product and to avail great deals.

Tags: , , , ,
Posted in Cartridge filters, Filter Cartridges, Pool Cartridges Cleaning, Pool Filter Cartridge Maintenance Tips, Pool Filters | No Comments »

Tips for Maintaining Pool Filter Cartridges

Monday, July 4th, 2011

If you are somebody who owns a pool then you definitely must be aware of the pool filters which are a great way to clean your pool at regular intervals. The filters clean away all the dust particles and other impurities that may cause different types of health hazards. However, keeping in view the incredible complication caused by grimy filters, maintenance of pool filter becomes essential.

As a matter of fact, it is important for you to know that cartridges form the most important component of pool filters. Since, cartridges of a pool filter are expensive, you need to handle them with care and ensure their proper maintenance so as to ensure their longevity and better performance.

Have a glimpse at some of the under mentioned tips to make your pool filters last longer as well as perform better.

  • Ensure regular cleaning of your pool filter cartridges to increase its longevity as well as performance.
  • Avoid using hard brushes or materials to clean your cartridges, instead follow the three step procedure of cleaning your pool’s cartridge filters.
  • Firstly, rinse off the remains of loose dirt and debris from the cartridge.
  • Secondly, soak the filter in a cleaner.
  • After you are done away with step 1 & 2 thoroughly rinse the cartridge to wash away remaining debris or dirt.
  • It is advisable to alternate two set of cartridges, in order to ensure the longevity of the cartridges. You need to clean the dirty cartridge after you have swapped it with a clean one.
  • Finally, always maintain the pool water chemistry balance. Unbalanced pool water can cause damage to your pool filters cartridges.

In order to maintain a clean and a healthy swimming pool, a properly maintained pool filter with cartridge is a must. By following the aforementioned tips you could not just avoid many different pool problems but also improve their performance.

Tags: , ,
Posted in Filter Cartridges, Pool Filters | No Comments »

Cartridge Filters Play a Decisive Role in Spa Usage

Thursday, October 7th, 2010

The right kind of spa and hot tubs also require the right kind of filters. Using accessories like cartridge filters is the recent trend among spa users. The reason is their longevity and cleaning capability. Such equipments on being installed in spas release clean jets of water, a pre-requisite for spa users. The installation of this equipment in Spas is compulsory.

There should not be any doubts about the performance of the filter. It can be used and reused after washing. It clogs everything that passes through its filament. Hence, the water that finds escape is crystal clean. Spa mongers now can make use of their spa for aromatherapy and other treatments. Treatments become possible at home with outstanding results. The reason is there is no contamination of water and all therapies can be done in explicitly clean environs.

Sta-Rite Cartridge filters or Waterway Spa cartridges can be installed in spas at home. They serve as very productive mediums to clean the waste that is found in water used in bath tubs. Once the filtering medium gets completely clogged its cleaning is also much easier. The filters just need to be flushed with water and then its cartridge dipped in a solution of muriatic acid and cleaned with chlorine. This cleans every iota of dirt from its surface. The filter can then be reused and installed in spas. There is much reliability on this type of filters. Spa users are enjoying the benefits that the filters offer and the ease of their use.

Tags: , , ,
Posted in Cartridge filters | No Comments »

Cleaning a Cartridge Filter

Monday, September 27th, 2010

It is very essential that pool filter users buy pleated fiberglass mat or a synthetic filter media and not simply paper as its cartridge. The reason is that coagulated cartridges of cheap filtering mediums can break down and hence the filter can be rendered useless. The operation of such pool accessories has to be carried out in a normal way. The moment it gets coagulated with debris, it needs to be removed from the filter interiors and washed following certain procedures.

First the cartridge needs to be washed properly with the help of a garden hose. Then it needs to be dried in bright sunshine. The process is the same for a Hayward Filter Cartridge, a Jacuzzi pool filter or similar brands like Harmsco. Having completed the first step of rinsing with water, the filtering medium is then immersed in muriatic acid solution to get rid of sticky substances that is hard to remove. The filtering medium is then once again dried in sun and then rinsed with water. This clears out all remaining dirt and makes the medium eligible to be refitted in the pool filter.

The cartridge medium comprises of tiny holes and acid cleaning ensures that the pores are emptied of coagulated impurities so that the medium functions with the same level of performance when newly installed. There is no need to buy new replacement filters if the cartridges are regularly cleaned. This necessitates all pool users to keep a tab on their cartridges and clean them whenever they get clogged.

Tags: , , , ,
Posted in Cartridge filters | No Comments »

Tips for Maintenance of Pool Cartridge Filters

Thursday, July 22nd, 2010

Pool maintenance is of real concern but it can be eased with the filtering techniques that are in use. There are many ways of keeping pools clean. Use of cleaners, vacuum pumps, covers and filters have always fascinated pool users. Among these filters has proved to be the most effective means for execution of cleaning process. The use of cartridge filters of brands like Jandy, Intex and Pentair are very much in use.

On installation of pool filters, it is very important to check regularly whether they are clogged. It is good to brush and clean the filter interiors whenever they are taken out for a check. Always spray jets of water from a hose to release stacked impurities on the cartridge filtering medium. This is vital for the maintenance of your pool filter. It is not always necessary to use muriatic acids and chlorine to clear the dirt accumulated on the cartridge surface. Only if the impurities are too hard to be removed then acid use is required. Skimming the filtering medium may also work but then there is always the chance of damage to cartridges.

Using replacement filter cartridges is a very wise means of keeping pools safe. The reason is the pores of the new filtering medium always remain capable of trapping dirt particles that are microscopic in size. In old cartridges, some leakages may occur due to depletion of the medium. So, using new filtering medium helps to keep the water balance intact. The pH, alkalinity and chlorine levels then stay normal when tested.

Tags: , , ,
Posted in Pool Filter Cartridge Maintenance Tips | No Comments »

Jacuzzi Pool Filter Troubleshooting Methods

Wednesday, July 21st, 2010

It you are using a Jacuzzi pool filter and are faced with the problem of clogged in cartridges it is advised that you follow the cleaning methods as suggested by the manufacturers of pool filters. The new cartridge filters are much more advanced and easy to clean as compared to the traditional filters. It bridges the gap between filters in use and efficiency in filtration processes.

Once a pool user has planned to clean clogged pool filter accessories, he should first switch off the pump system and drain out the water of the pool. Then the filters should be removed from the concrete platforms where they are installed. The cartridge needs to be pulled out and washed with strong jets of water. This can be sufficient for the cleaning to complete. On refitting the cartridge in the filter it should work like before. But if the water continues to be release cloudy from the filter, then there must be some other problem. Under such circumstances, it is advised that the pool-user clean the cartridge with muriatic acids to release any left out sticky substances. The user should also check whether the Jacuzzi Pool filter cartridgethat he is using is broken somewhere. In case, a leak appears somewhere, then the cartridge should be replaced with a new one..

Replacement parts of popular brands like Hayward and Waterway can be installed in-place of the clogged cartridge. This should work well as the cartridges of these brands can fit into any filters. Hence the filtering process can be resumed with the installation of new cartridges.

Tags: , , , , , ,
Posted in Pool Filter Techniques | No Comments »

New Filtering Systems Replacing the Traditional Ones

Wednesday, July 7th, 2010

The pool filters that people use in their ponds are very essential for them to maintain the clarity and pH balance of their pool. So, to be judgmental about installing the right kind of pool filters is very essential for the good keeping of swimming ponds. The new trend is to install cartridge type filters and this has replaced the other older forms of filtering systems.

There is an immense zeal in people to find alternatives in filtering mediums that can replace the old systems like sand and DE filters. The introduction of plastic type filters with cartridges installed within them has made this possible and has abolished the use of the old types. Now, pool users are randomly replacing their traditional filtering systems with pool equipments like Grid filters and Cartridge filters. These equipments are easy to install and operate as they have replacement parts like cartridges that can be refitted with a new one once they get clogged. The medium is also very active in separating dirt from water. Microscopic particles that is hard to be traced deposits on the surface of the cartridge that is being used. The translucent surface just allows water molecule to pass through them and so the purity of the water used in swimming ponds can be maintained.

It is good to install such filters of manufacturers such as Intex, Waterway and Doughboy. Their replacement parts are easily available and the price is also marginal.

Tags: , , , , , , , , , , ,
Posted in Cartridge filters | No Comments »

Filters can Make your Spa, a vivid experience

Thursday, July 1st, 2010

Spa experience can be vivid especially if the spa is installed at your home. The inexplicable comfort that jets of water released from spas give to users is really exciting. The water-stream can really relax you and keep you healthy. Walking into spas and focusing on quieter form of exercise can be done at home with much ease. It is just that the spa that you use needs to be fitted with filters so that jets of water released is crystal clean. Doughboy spa products can be very good for your spa. The replacement filters can really bring difference in your spa experience as all dirt particles are trapped and the dirt ridden cartridge can be replaced with a new one.

Using Hot spring spas or Gulf coast spas can be very pragmatic as they can be used to filter out dirt matter to exalt its purity and serenity. Your spa can then become your masseuse, where you can also enjoy the gifts of aromatherapy and sauna in one setting. In your privacy, the spa leaves you refreshed and started for the day. Moreover, there are not much concerns of keeping it clean as just by replacing the cartridge keeps it ideally fit for use on a continuous basis. Hot or cold showers with the built-in spa jets can give you the greatest comfort and keep you fit in working days. So, using the spa can really become a thrilling and an exciting activity with the use of right kind of filters.

Tags: , , , , ,
Posted in Pool Filters | 2 Comments »

Filter Installation: A riotous way to keep your pools clean

Wednesday, June 30th, 2010

Spas and pools are delightful activities and it is here that you get to revolt with friends on holidays. It is very obvious that people want to relax and have fun on holidays and week ends. The pool and spa can thus be a very good alternative where you can receive aromatherapy and massages. But then it is also very important to keep your pool clean and for which you need to use pool equipments like filters and other pool cleaners. The modern day cartridge filters can efficiently distill out dirt from water used in pools. Their cartridge is made of a specially designed filament formed of polyester material. This filament acts as the filtering medium and its tiny pores can trap particles measuring in microns.
Using such filters in ponds also brings comfort in the life of people as it relieves them from the pain of cleaning their filters when it gets polluted with impurities. What you can do is just replace the cartridge that actually gets stained and clogged with dirt that remains suspended in water. Replacement filter parts in the form of cartridge of brands like Intex and Unicel can be used to replace coagulated cartridges. If you wish you can also clean a cartridge with water and muriatic acid and refit it in the filter for reuse. So, it definitely has an upper hand over traditional filters where you need to backwash and refill with DE apart from cleaning their interiors. Information about such filters can be accessed online by visiting websites like filters4less.biz.

Tags: , , , , , , , ,
Posted in Filter Installation | No Comments »